nntp2http.com
Posting
Suche
Optionen
Hilfe & Kontakt

Wired and Wireless Combo

Von: Rod Makin (rod.makin@gmail.com) [Profil]
Datum: 18.01.2008 21:06
Message-ID: <45210a63-4789-4792-8cde-3d3f9aa4c6da@m34g2000hsb.googlegroups.com>
Newsgroup: uk.tech.electronic-security
All,

Ive read a lot of discussion on this about wireless v wired burglar
alarms but I think I need a combination of the 2. I dont seem to be
able to find a system that quite matches my requirements. I will be
fitting the alarm myself so it needs to be relatively simple, though
Im not a complete numpty.

My home is new build so it has the cabling in place for 4 PIR's, there
is a blanking plate in the hall for a key pad, a blanking plate in a
cupboard where I suppose the main controller goes, there is also a
cable going to an outside wall for the bell. Now typically this would
be quite a simple installation I imagine, however, I also have a
garage which is detached from the house which I would also like to be
alarmed from the same unit. What Im looking for I suppose is a system
that I can use wired for the wired PIR's in the house, but also use a
wireless connection to whatever is in the garage. The thing is, I
would want the wireless connection to the main unit to come from a
mains powered PIR (or door sensor) rather than a battery powered one
since I dont want to be changing batteries all the time. The garage is
only a few feet from the house.

The other thing is that its a double garage so would you recommend
door sensors or just a PIR, or more than 1 PIR? I'd also like that
sensor to be able to chime when its activated.

And finally (news at ten moment) how difficult / complex is it to get
the alarm to phone you when it goes off?

I know that Im asking for the moon on a stick here, but I dont want to
buy a half way solution thats not what I want. What can you recommend
anything for all of this?

Thanks


Rod

[ Auf dieses Posting antworten ]

Antworten