• Als Spam markieren
• Beitrag melden

• 
  Diese Gruppe Alles

• Archiv
• RSS-Feeds

• Kontakt
• Hilfe
• Impressum
• Datenschutz

Re: 706 back in the car

"Dave" <davenpat@btopenworld.com> wrote in message
news:R_adndTmiZ2XLWnXnZ2dnUVZ8iSdnZ2d@bt.com...
>I am thinking about going mobile again with my 706 in the car.
> Previously, I have used a boot mount with not much success. Now I am
> looking at putting a ladder bar on the roof.
>
> I was down at Nevada last week looking at options and there is something
> in the shop that will let me put a mount on one, and my question is this.
>
> At HF bonding to the car body is very important. What I am thinking of
> doing is to bond to the car through the bolts that are used for the
> interior grab handles just above the doors.
>
> What size of copper braid would I need, assuming the Hustler was mounted
> adjacent to the door? The length of braid would be about 12 inches, or 300
> mm for the frog lovers :-)
>
> Dave

get a car like a merc where the roof rails are earthed then you don't need
noisy cross bars .....or if the rails are not earthed as in my wagon r, take
off the plastic end caps and short earth strap the mount to the fixing
bolts.....simples ....I have never had much luck earthing just ladder
bars.....and I don't think a foot long earth strap is a good idea if you
want to avoid RF burns to your nose and lips ! .....and if you use a centre
loaded hustler with aluminimum fold over botton section it weighs a TONNE
.......good for static mobile though .......

Antworten